January 27, 2022 by Alyssa Rosenzweig | Blog
Until now, no Valhall devices (Mali-G57, Mali-G78) ran mainline Linux - whilst this made driver development obviously difficult, there’s no better time to write drivers than before the devices even get into the hands of end users.
January 25, 2022 by Pekka Paalanen | Blog
My work on Wayland and Weston color management and HDR support has been full of learning new concepts and terms. Many of them are crucial for understanding how color works, and what the values in a pixel actually mean.
January 20, 2022 by André Almeida | News & Events
With kernel 5.16, the community has once again produced a release full of great features, including two projects that had been in development for some time by our kernel team: the new futex syscall and the new fanotify event.
January 11, 2022 by Mark Filion | News & Events
The new year has only just begun, and already our first conference of 2022 is on the horizon. Join us at linux.conf.au, as we discuss bringing WebM Alpha support to GStreamer, and provide a status update on the futex2 syscall.
December 22, 2021 by Alexandros Frantzis | Blog
It has been just over a year since we first announced our effort to implement a Wayland driver for Wine. Here's a recap of what has been done since then to improve both the functionality and stability of the driver.
December 22, 2021 by Gustavo Padovan | News & Events
With over 350 patches authored and nearly 200 reviewed and tested in multiple subsystems, 2021 was a great year for Linux kernel development at Collabora. Here is a look at some of our achievements during the year.
December 20, 2021 by Christoph Haag | News & Events
The Linux desktop in VR goes headless! Introducing wxrd, a standalone Wayland compositor for xrdesktop based on wlroots, with minimal dependencies.
December 08, 2021 by Mark Filion | News & Events
A year of online conferences that began with linux.conf.au will end on a high note next week as Collaborans present three talks at Open Source Summit Japan + Automotive Linux Summit 2021. Join us!
November 26, 2021 by Antonio Caggiano | Blog
A step-by-step guide on how to enable 3D acceleration of Vulkan applications in QEMU through the new Venus experimental Vulkan driver for VirtIO-GPU with a local development environment.
November 10, 2021 by Sebastian Reichel | News & Events
It might be smaller than the last few kernels, but with well above 10,000 non-merge changes, the latest Linux kernel release still packs a punch. Released on October 31, kernel 5.15 brings lots of exciting new features.
November 02, 2021 by George Kiagiadakis | News & Events
Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.
October 26, 2021 by Xavier Claessens | Blog
Maintaining a non-trivial set of GStreamer patches can be tricky. Thanks to the recent move to a single, unified git repo, you can now easily run a GStreamer continuous integration pipeline on your own GitLab instance. Here's how.
December 17, 2018 by Gustavo Padovan | Blog
Released a few months ago, the Google Pixel 3 is the first Android phone running with the mainline graphics stack. A feat that was deemed impossible 10 years ago is now a reality thanks to a lot of hard work from the entire community.
November 28, 2018 by Martyn Welch | Blog
In an ideal world, everyone would implicitly understand that it just makes good business sense to upstream some of the modifications made when creating your Linux powered devices. Unfortunately, this is a long way from being common knowledge.
November 23, 2018 by Alexandros Frantzis | Blog
How can we measure the comprehensiveness of a test suite? Code coverage is the standard metric used in the industry and makes intuitive sense. However, it can often present some difficulties for large scale surveys.
November 21, 2018 by Gabriel Krisman Bertazi | Blog
A real-world use case of eBPF tracing to understand file access patterns in the Linux kernel and optimize large applications.
November 06, 2018 by Xavier Claessens | Blog
Did you know you could register your own PC, or a spare laptop collecting dust in a drawer, to get instant CI going on GitLab? Not only will you get faster CI, but you'll also reduce the queue on the shared runner for others!
October 31, 2018 by Erik Faye-Lund | Blog
For the last month or so, I've been playing with a new project during my work at Collabora, and as I've already briefly talked about at XDC 2018, it's about time to talk about it to a wider audience.
October 18, 2018 by Alexandros Frantzis | Blog
For projects of any value and significance, having a comprehensive automated test suite is nowadays considered a standard software engineering practice. Why, then, don't we see more prominent FOSS projects employing this practice?
October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
September 17, 2026 by Kara Bembridge | News & Events
Next week we'll be in Paris for Kernel Recipes! We’re pleased to sponsor this gathering of the kernel community and contribute a talk on upstream H.264 and HEVC decoding for Rockchip RK3588/RK3576.
September 15, 2026 by Kara Bembridge | News & Events
Visit us at the STMicroelectronics booth at SIDO to see how the STM32MP2 platform enables responsive edge-AI applications for industrial use cases.
September 11, 2026 by Santosh Mahto | News & Events
Working closely with Google, we built the first RDK-based Chrobalt reference platform for third-party devices, enabling Chromium-based YouTube support, certification, and automation on embedded TVs and set-top boxes.
September 10, 2026 by Valentine Burley | News & Events
Turnip is the first Mesa driver to achieve official Vulkan conformance on Android, with stronger Android integration, shared Vulkan runtime improvements, and real-device CI testing on Qualcomm Adreno hardware.
September 08, 2026 by Kara Bembridge | News & Events
Join us in Montreal for the 10th edition of RustConf! Catch our talk on Tyr, the new Rust kernel driver for Arm Mali GPUs.
September 08, 2026 by Kara Bembridge | News & Events
Collabora is heading to Amsterdam! Join us at Booth A63 in Hall 14 to see GStreamer Analytics with machine learning, standalone XR remote rendering, and our MediaTek Genio-powered Magic Mirror for virtual clothing swaps.
August 18, 2026 by Deborah Brouwer | News & Events
Linux kernel 7.2 adds broad core, Rust, and hardware-support updates, with Collabora contributing 102 patches across graphics, media, virtualization, networking, power management, and SoC enablement.
August 12, 2026 by Julien Massot | News & Events
Collabora and MediaTek continue expanding upstream support across the Genio IoT family, with HDMI 2.0 now enabled for existing boards, Genio 520 and 720 support progressing in Linux, and Genio Pro 5100 enablement extending into U-Boot and Trusted Firmware-A.
July 30, 2026 by Faith Ekstrand | News & Events
Kraid, the new compiler for the Panfrost driver stack, now passes all Vulkan CTS compute shader tests. This marks a major milestone, with work continuing on additional shader stages, code quality, and performance optimization.
July 28, 2026 by Louis-Francis Ratté-Boulianne | News & Events
RADV’s experimental Windows port brings Mesa’s open source Vulkan driver for AMD GPUs closer to running real workloads, while highlighting the need for a stable interface to AMD’s proprietary kernel driver.
July 17, 2026 by Denis Pynkin | News & Events
The Holo Core aarch64 preview provides early binaries, sources, and containers for an Arch Linux-based aarch64 port, backed by tooling and CI work for reproducible rolling-release builds.
July 16, 2026 by Marius Vlad | News & Events
Weston 16 expands HDR and color management support, improves Perfetto debugging and DRM backend performance, and adds new protocol and renderer capabilities for more efficient and flexible Wayland compositor development.
Here are the events we'll be attending in the coming weeks – come say hello!
September 17 - 18, Lisbon, Portugal
September 21 - 23, Paris, France
September 28 - 30, Toronto, Canada
September 30 - October 1, Berlin, Germany
October 5 - 7, Prague, Czech Republic
October 5 - 9, Calgary, Canada
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português