September 30, 2021 by Adrian Ratiu | Blog
With the LLVM toolchain seeing increasing development and adoption alongside the older, more established GNU toolchain, projects needing to support both, in particular the GNU C library (glibc), are facing challenges and questions.
September 24, 2021 by Mark Filion | News & Events
Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.
September 21, 2021 by Alyssa Rosenzweig | News & Events
This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.
September 16, 2021 by Stéphane Cerveau | News & Events
GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.
September 10, 2021 by Lubosz Sarnecki | Blog
This summer, Christoph Haag and I had the pleasure of taking part in Google Summer of Code as mentors for xrdesktop, the Open Source project bringing the Linux desktop to VR on Valve's SteamVR & Monado. Here's what was accomplished.
September 07, 2021 by Nícolas F. R. A. Prado | News & Events
With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.
September 01, 2021 by Mark Filion | News & Events
September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!
July 20, 2021 by Alyssa Rosenzweig | News & Events
After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.
July 08, 2021 by Gabriel Krisman Bertazi | News & Events
Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.
June 23, 2021 by Daniel Almeida | Blog
Earlier this year, from January to April 2021, I worked on adding support for stateless decoders for GStreamer as part of a multimedia internship at Collabora. Here's a recap of this completed work.
June 21, 2021 by Shreeya Patel | News & Events
Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.
June 21, 2021 by Erica Ryoo | News & Events
Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!
May 04, 2017 by Olivier Crête | Blog
Along with the usual load of memory leaks, crashes and other bugs, Collabora's multimedia team once again contributed a number of improvements across a wide number of areas.
April 27, 2017 by Robert Foss | Blog
Getting Android up and running on the iMX6 platform using an open source graphics stack has been impossible up until recently, but now you can. Here's a guide through the steps.
April 25, 2017 by Olivier Crête | Blog
With GStreamer you can easily receive a AES67 stream, the standard which allows inter-operability between different IP based audio networking systems and transfers of live audio between profesionnal grade systems.
April 21, 2017 by Robert Foss | Blog
If you're looking to change the Android boot animation to something other than the stock one, here's a hands-on guide to help you to do it.
April 19, 2017 by Olivier Crête | Blog
With GStreamer 1.12's first release candidate out for testing and the final release expected soon, here's a brief preview of some of the (many) new features, bugfixes and improvements that will be arriving with this release.
April 10, 2017 by Gabriel Krisman Bertazi | Blog
Like the bug that no one can solve, many issues occur on the interface between the user application and the operating system. But even in the good Open Source world, understanding what is happening at these interfaces is not always easy.
April 05, 2017 by Daniel Stone | Blog
Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.
March 29, 2017 by Robert Foss | Blog
Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.
March 28, 2017 by Gabriel Krisman Bertazi | Blog
Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.
March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
April 06, 2018 by Mark Filion | News & Events
Attending the NAB Show in Las Vegas? Make sure to stop by Collabora's booth, #N2908VR in the North Hall, and get a firsthand look at the latest in Open Source software integration!
April 03, 2018 by Jassie Badion | News & Events
Meet the newest members of our ever-growing engineering and administrative teams! Welcome Arnaud, Omar, Correntin, Lakshmipathi, Rebecca, Ezequiel, Ritesh, Ana and Zeeshan!
April 02, 2018 by Gustavo Padovan | News & Events
Linux Kernel 4.16 was released over the weekend, and with it came 33 patches contributed by 8 different Collabora developers, including the addition of usb3 and extcon support for Rockchip RK3399 devices, and display support for the Nokia N9.
March 22, 2018 by Olivier Crête | News & Events
After a particularly long cycle of over 10 months, GStreamer accumulated many improvements that are now available in the 1.14 release. Here's a look at some of the contributions from Collabora's engineers that we're particularly proud of.
March 22, 2018 by Mark Filion | News & Events
After a great time in Portland last week for ELC, Collaborans have arrived in Singapore for the 2018 edition of FOSSASIA Summit, the premier Open Technology event in Asia for developers, contributors, start-ups, and technology companies.
March 09, 2018 by Mark Filion | News & Events
It's that time of the year again! The snow has melted, spring is right around the corner and the annual Embedded Linux Conference begins next week in Portland! If you are planning on attending, come say hello or catch one of our three presentations!
February 26, 2018 by Mark Filion | News & Events
This week, we're in Nuremberg, Germany to take part in this year's edition of Embedded World, the leading international fair for embedded systems! Come say hello, booth 4-170!
January 29, 2018 by Gustavo Padovan | News & Events
Linux Kernel 4.15 was released yesterday, and it once again contained patches contributed by Collabora, including bigger patchsets like V4L2 Explicit Synchronization and UTF-8 case insensitive lookups for EXT4.
January 26, 2018 by Mark Filion | News & Events
Brussels, here we come! We're thrilled to be sponsoring this year's edition of FOSDEM, taking place in just over a week's time (February 3 & 4), at the Université Libre de Bruxelles. Come say hello, or catch one of a dozen talks given by Collaborans!
December 19, 2017 by Mark Filion | News & Events
For a second time this year, Collabora is proud to be sponsoring the latest round (Round 15) of Outreachy internships! More specifically, Collabora has chosen to sponsor the Linux kernel projects for the December 2017 - March 2018 semester.
December 14, 2017 by Jassie Badion | News & Events
With less than 12 days to go before Christmas, here are 12 reasons, from 12 different people who became Collaborans this year, on why you should consider joining our team!
November 28, 2017 by Mark Filion | News & Events
We're delighted to be one of the 33 new members of the Secure Reliable Transport (SRT) Alliance, a group dedicated to accelerating interoperability of video streaming solutions and fostering collaboration with industry leaders to achieve lower latency…
Here are the events we'll be attending in the coming weeks – come say hello!
September 28-29, Paris, France
October 17-19, A Coruña, Spain
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português