March 28, 2017 by Gabriel Krisman Bertazi | Blog
Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.
March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 22, 2017 by Mark Filion | News and Events
Check out the April issue (#222) of Linux Format magazine for our new monthly column on all things Open Source, including graphics, multimedia and more!
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
March 08, 2017 by Robert Foss | Blog
Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.
March 07, 2017 by Mark Filion | News and Events
Over the next two weeks, Collaborans will be present at four different events across the globe. If you plan on attending at any of these conferences, please reach out and say hello!
March 01, 2017 by Daniel Stone | Blog
The past few months have been busy ones on the open-source graphics front, bringing with them Wayland 1.13, Weston 2.0 and Mesa 17.0. Here's a look at some of these developments, including Collabora's behind-the-scenes work on performance improvement.
February 23, 2017 by Robert Foss | Blog
How to create your custom Android image, and APK app(s), all at once.
February 21, 2017 by Mark Filion | News and Events
Starting today, and for the next few days, Collaborans will be taking part in this year's Embedded Linux Conference North America, the "premier vendor-neutral technical conference for companies and developers using Linux in embedded products".
February 20, 2017 by Gustavo Padovan | News and Events
Linux Kernel 4.10 is out, and this time Collabora contributed a total of 39 patches by 10 different developers.
February 16, 2017 by Robert Foss | Blog
How to set up a fully functional ChromiumOS development environment on actual Chromebook hardware.
April 26, 2019 by Adrian Ratiu | Blog
In part 1 and 2 of this series, we took a condensed in-depth look at the eBPF VM. In part 3, we define the high-level components of an eBPF program, including the backend, loader, frontend and data structures.
April 25, 2019 by Guillaume Desmottes | Blog
GStreamer's logging system is an incredibly powerful ally when debugging but it can sometimes be a bit daunting to dig through the massive amount of generated logs. I often find myself writing small scripts processing gst logs when debugging.
April 24, 2019 by Marius Vlad | Blog
The recent release of version 6 of the Weston compositor has brought with it the weston-debug protocol, a new feature that allows developers and users alike to display on-the-fly various debugging (logging) information generated by the compositor.
April 18, 2019 by Ezequiel Garcia | Blog
A well-known Linux kernel developer once said, a poor craftsman famously complains about his tools, but a good craftsman knows how to choose excellent tools. Here's a python-based tool that integrates git and patchwork, and can greatly improve your toolbox.
April 15, 2019 by Adrian Ratiu | Blog
The second part of this series takes a more in-depth look at the eBPF VM and program studied in the first part. Having this low level knowledge is not mandatory but can be a very useful foundation for the rest of the series.
April 05, 2019 by Adrian Ratiu | Blog
Interested in learning more about low-level specifics of the eBPF stack? Read on as we take a deep dive, from its VM mechanisms and tools, to running traces on remote, resource-constrained embedded devices.
April 01, 2019 by Robert Foss | Blog
It's now possible to run Android applications in the same graphical environment as regular Wayland Linux applications with full 3D acceleration. Here's a look at SPURV, our experimental containerized Android environment.
March 27, 2019 by Andrzej Pietrasiewicz | Blog
In the previous post I introduced you to the subject of USB gadgets implemented as machines running Linux. In this post, we look at how to implement your very own USB function with FunctionFS and how to integrate that with systemd.
March 20, 2019 by André Almeida | Blog
In this tutorial, we'll look at how to create a functional and simple Arch Linux virtual machine image, that can have network access, display graphical windows and share a folder with the host.
March 13, 2019 by Robert Foss | Blog
During the past few months significant progress has been made on the Open Source Arm Mali GPU driver front, culminating in the Panfrost driver targeting Mali T and G-series of GPUs being available now.
March 12, 2019 by Helen Koike | Blog
With just a few simple steps, you can compile and boot a Raspberry Pi using the Linux kernel mainline source code. Here's how.
March 05, 2019 by Lucas Kanashiro | Blog
Since the last Debian release, a number of changes have been made in the Debian Cloud Team, both on the technical & organisational level within the community. Here's a look at what's in store for Buster!
June 02, 2022 by Dmitry Osipenko | News & Events
Released by Linus Torvalds on May 22 after a busy two-month development cycle, Linux kernel 5.18 brings new features and lights up new hardware. Let's take a look at the contributions made by our engineering team.
May 26, 2022 by Kara Bembridge | News & Events
After a two-year hiatus, the City of Lights is shinning brightly again to welcome the community for a full week of engaging talks at Embedded Recipes and Kernel Recipes conferences.
May 17, 2022 by Kara Bembridge | News & Events
Less than a day away, May 18th looks to be a very busy time. With Live Embedded Event and Embedded Vision Summit taking place almost simultaneously, Collabora will be presenting four different talks!
April 29, 2022 by Frederic Danis | News & Events
Over the last two years, Bluetooth® audio support has steadily grown in PipeWire and has become a featureful, stable, conformant, open source Bluetooth® audio stack implementation. Here's a look at where things stand.
April 27, 2022 by Jakub Piotr Cłapa | News & Events
Looking to use hardware-backed and virtual SocketCAN interfaces inside your Kubernetes Pods? A new device plugin now allows processes inside a pod to communicate with each other using the full Linux SocketCAN API.
April 06, 2022 by Frédéric Plourde | News & Events
Monado has been accepted for the first time as a mentoring organization for the 2022 Google Summer of Code (GSoC)! Collabora will be providing three mentors to support contributors who want to work on Monado-related projects.
March 31, 2022 by Sebastian Fricke | News & Events
While eastern Europe has experienced ghastly events that have shaken the world, the latest Linux kernel release could aptly be named "Solid & Steady." Here's a look at some of the contributions made by Collabora's kernel team.
March 24, 2022 by Kara Bembridge | News & Events
Join us next week for Open Source 101, a one-day conference where we'll dive into the latest around FOSS virtual & augmented reality, and look at the implications of enabling automated testing upstream.
March 01, 2022 by Simon McVittie | News & Events
Congratulations to Valve on the release of the Steam Deck, their new handheld gaming PC! With it comes a new release of SteamOS, complete with a brand new A/B design for seamless system updates.
February 28, 2022 by Kara Bembrirdge | News & Events
As the globe still navigates the twists and turns of the times, Collabora can confidently say we've been steadily on the rise. We've added brand new members to our crew who are more than equipped to keep pace.
February 18, 2022 by Olivier Crête | News & Events
At the forefront of contributors for this latest release, our team's work focused on two areas in which we believe GStreamer shines the brightest: embedded systems, and network streaming, in particular WebRTC.
February 01, 2022 by Kara Bembridge | News & Events
Kicking off in a matter of days, this jam-packed weekend will host over 50 devrooms and nearly 700 talks including an in-depth look at Mobian: an open-source project aimed at bringing Debian GNU/Linux to mobile devices.
Here are the events we'll be attending in the coming weeks – come say hello!
April 13 - 18, Barcelona, Spain
April 15 - 16, Tokyo, Japan
April 18 - 22, Las Vegas, USA
April 23 - 27, Rio de Janeiro, Brazil
April 28 - 29, Stuttgart, Germany
April 29, San Jose, USA
April 30, San Francisco, USA
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português