May 06, 2025 by Gustavo Noronha | Blog
Gustavo Noronha helps break down C++ and shows how that knowledge can open up new possibilities with Rust.
May 01, 2025 by Kara Bembridge | News & Events
Join us in Stuttgart, Germany for XR EXPO 2025! This two-day event will be the meeting place for the XR community to exchange ideas and explore the latest trends.
April 29, 2025 by George Kiagiadakis | Blog
Configuring WirePlumber on embedded Linux systems can be somewhat confusing. We take a moment to demystify this process for a particular use case.
April 24, 2025 by Martyn Welch | Blog
Collabora's Board Farm demo, showcasing our recent hardware enablement and continuous integration efforts, has undergone serious development over the years. Here's a look at notable changes and improvements made for Embedded World 2025.
April 22, 2025 by Faith Ekstrand | News & Events
As of today, NVK is a conformant Vulkan 1.3 implementation for NVIDIA Maxwell, Pascal, and Volta GPUs, and will be enabled by default starting with Mesa 25.1.
April 17, 2025 by Eleni Katsoula | News & Events
Our commitment to open source extends beyond contributing code. We are dedicated to upholding the highest standards of license compliance throughout our development processes.
April 15, 2025 by Mark Filion | News & Events
This May, Embedded Recipes 2025, co-sponsored by Collabora, heads to Nice, France with talks, workshops, and a PipeWire hackfest, all bookended by the Linux Media Summit and the GStreamer Spring Hackfest!
April 14, 2025 by Erik Faye-Lund | News & Events
PanVK has reached a new milestone, and is now officially conformant with the Vulkan 1.1 specification on the Arm Mali-G610 GPU! The submission was done from the Mesa 25.0.2 release, and covers both armhf as well as aarch64 architectures.
April 10, 2025 by Daniel Stone | News & Events
Three demos. One stand. From end-to-end HDR and a brand-new SoC running PanVK, to NVK and WebGPU out of the box — discover how Collabora pushed open source graphics forward at Embedded World 2025.
April 09, 2025 by Olivier Crête | News & Events
Collabora once again played a key role in the latest release of GStreamer, contributing enhancements such as improved hardware efficiency, support for the MPEG-5 LCEVC codec, and better integration for analytics and machine learning.
March 26, 2025 by Cristian Ciocaltea | News & Events
The kernel release emphasizes the continuing growth and maturity of the Linux ecosystem and delivers new features, improvements, and optimizations that everyone will be eager to explore. See where Collabora's kernel team contributed to this release.
March 26, 2025 by Kara Bembridge | News & Events
Collabora is thrilled to see its partner, Hololight, join the Khronos Group and become an active member of the OpenXR Working Group. We are excited to support their innovative approach and rapid expansion in the XR streaming space.
April 24, 2019 by Marius Vlad | Blog
The recent release of version 6 of the Weston compositor has brought with it the weston-debug protocol, a new feature that allows developers and users alike to display on-the-fly various debugging (logging) information generated by the compositor.
April 18, 2019 by Ezequiel Garcia | Blog
A well-known Linux kernel developer once said, a poor craftsman famously complains about his tools, but a good craftsman knows how to choose excellent tools. Here's a python-based tool that integrates git and patchwork, and can greatly improve your toolbox.
April 15, 2019 by Adrian Ratiu | Blog
The second part of this series takes a more in-depth look at the eBPF VM and program studied in the first part. Having this low level knowledge is not mandatory but can be a very useful foundation for the rest of the series.
April 05, 2019 by Adrian Ratiu | Blog
Interested in learning more about low-level specifics of the eBPF stack? Read on as we take a deep dive, from its VM mechanisms and tools, to running traces on remote, resource-constrained embedded devices.
April 01, 2019 by Robert Foss | Blog
It's now possible to run Android applications in the same graphical environment as regular Wayland Linux applications with full 3D acceleration. Here's a look at SPURV, our experimental containerized Android environment.
March 27, 2019 by Andrzej Pietrasiewicz | Blog
In the previous post I introduced you to the subject of USB gadgets implemented as machines running Linux. In this post, we look at how to implement your very own USB function with FunctionFS and how to integrate that with systemd.
March 20, 2019 by André Almeida | Blog
In this tutorial, we'll look at how to create a functional and simple Arch Linux virtual machine image, that can have network access, display graphical windows and share a folder with the host.
March 13, 2019 by Robert Foss | Blog
During the past few months significant progress has been made on the Open Source Arm Mali GPU driver front, culminating in the Panfrost driver targeting Mali T and G-series of GPUs being available now.
March 12, 2019 by Helen Koike | Blog
With just a few simple steps, you can compile and boot a Raspberry Pi using the Linux kernel mainline source code. Here's how.
March 05, 2019 by Lucas Kanashiro | Blog
Since the last Debian release, a number of changes have been made in the Debian Cloud Team, both on the technical & organisational level within the community. Here's a look at what's in store for Buster!
March 04, 2019 by Tomeu Vizoso | Blog
Following two months of work to develop a new kernel driver for Midgard and Bifrost GPUs, the kernel side of Panfrost is now in a form close to be acceptable in the mainline Linux kernel.
February 18, 2019 by Andrzej Pietrasiewicz | Blog
A look at how to implement USB gadget devices on Linux machines which have the necessary UDC hardware, automate the manual configfs process via declarative gadget "schemes", and use systemd for gadget composition at boot time.
September 12, 2019 by Mark Filion | News & Events
Showcasing two brand new Open Source software demonstrations featuring the Xilinx high-performance Zynq UltraScale+ MPSoC, and the Magic Leap One augmented reality headset.
September 06, 2019 by Joey Ferwerda | News & Events
With the recent release of the OpenXR 1.0 specification, the presence of numerous Open Source platforms for Virtual Reality and Augmented Reality, and a growing community of developers, the need for a collaborative Open Source XR Conference became clear.
August 20, 2019 by Mark Filion | News & Events
Starting tomorrow, Collabora will be exhibiting & speaking at Embedded Linux Conference North America (ELCNA), the premier vendor-neutral technical conference for companies and developers using embedded Linux.
August 02, 2019 by Mark Filion | News & Events
This weekend, Collaborans are in São Paulo, Brazil, to take part in the third edition of Linux Developer Conference Brazil, a conference which aims to take the Brazilian Linux development community to the international level.
July 30, 2019 by Lubosz Sarnecki | News & Events
Today, we are very excited to announce xrdesktop, a new open source project sponsored by Valve, enabling interaction with traditional Linux desktop environments, such as GNOME and KDE, in VR.
July 25, 2019 by Andrej Shadura | News & Events
With DebConf19, the annual conference for Debian contributors and users, in full swing this week in Curitiba, Brazil, what better time to look at the contributions made by Collaborans to the latest Debian release!
July 17, 2019 by Gabriel Krisman Bertazi | News & Events
With 11 engineers authoring, reviewing and testing nearly 170 patches for this latest release, Collabora ranked 8th in the list of most active employers by lines changed, sharing ranks with some of the prominent employers in Linux kernel development.
June 21, 2019 by Jassie Badion | News & Events
For many, June 21, day of the Solstice, is a day of celebrations. At Collabora, we're also celebrating, as we take a moment to welcome all the newest members of our engineering and administration teams who've joined over the last year!
May 30, 2019 by Mark Filion | News & Events
A few days ago, coding began for this year's Google Summer of Code (GSoC) projects. Along with four GStreamer and Wayland related projects, this year's edition also includes two Debian projects for which Collaborans will be mentors.
May 09, 2019 by André Almeida | News & Events
Earlier this week, Linux Kernel 5.1 was released, and with it came over 13,000 commits from developers all around the world, including Collaborans. This time around, no less than 12 different developers contributed commits (64), sign-offs (111) & more.
May 06, 2019 by Aaron Boxer | News & Events
After a year-long development cycle, the much anticipated release was made available recently. With it came a number of exciting new features we're especially proud of, including per-element latency tracer and support for planar or non-interleaved audio.
April 09, 2019 by Nicolas Dufresne | News & Events
Collabora contributes elements implementing the RIST Simple Profile to GStreamer. This specification adds retransmissions to RTP streams in a way that it compatible with existing broadcast encoders and decoders.
Here are the events we'll be attending in the coming weeks – come say hello!
January 31 - February 13, Brussels, Belgium
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português