May 29, 2023 by Kara Bembridge | News & Events
Set in the heart of Silicon Valley, XR enthusiasts are eagerly awaiting to see the latest advancements on display at Augmented World Expo (AWE) 2023.
May 25, 2023 by Marius Vlad | News & Events
Released last week, Weston 12.0 brings a number of highlights including two new backends, support for multiple scanout devices, and the addition of new protocol implementations. Here's a look at some of the changes that have landed in this new version.
May 18, 2023 by Eugen Hristev | Blog
Work continues on the Radxa ROCK5B RK388, as PCIe and RTL8125B networking support in U-boot have now been added. Publishing code as Open Source can benefit many different other projects, and allows anyone to benefit.
May 03, 2023 by Rebecca Mckeever | Blog
NVK, an open-source Vulkan driver for NVIDIA hardware that is part of Mesa, now supports the Vulkan extension VK_KHR_multiview.
April 27, 2023 by Eugen Hristev | Blog
The beauty of Open Source is that we can reuse code written by many other people, keep their authorship, and credit them for their work, without needing to reinvent anything!
April 25, 2023 by Muhammad Usama Anjum | News & Events
Released earlier this week, Linux Kernel 6.3 brings thousands of new lines of code to improve the core kernel, architectural support, networking and filesystems.
April 20, 2023 by Kara Bembridge | News & Events
Spring is in bloom in the northern hemisphere, and with it comes three tech events we'll be attending - PyCon US, Shell & Display Next Hackfest, and Linaro Connect!
April 18, 2023 by Xavier Claessens | Blog
Want to develop your Meson project in a modern IDE? Make sure to install Meson VSCode extension which is now fully functional with the recent release of Meson 1.1.0!
April 05, 2023 by Vineet Suryan | Blog
Labeling errors are common in present open-source 3D perception datasets, which could have impactful consequences. To tackle this issue, we used Carlafox to automatically generate an error-free synthetic dataset for 3D perception.
March 27, 2023 by Kara Bembridge | News & Events
It’s no secret that Tech has faced some setbacks lately, namely on the headcount front. Despite these uncertainties, Collabora has had the privilege of increasing our roster with new teammates.
March 14, 2023 by Frédéric Plourde | News & Events
We're proud to announce that Monado, the free and open source XR platform, has been accepted as a mentoring organization for XROS, the XR Open Source Fellowship Program.
March 13, 2023 by Mark Filion | News & Events
As a recent new member of STMicroelectronics' Partner Program, we're excited to be showcasing the STM32MP1 at Embedded World this week, our first demo featuring the STM32 platform.
April 18, 2019 by Ezequiel Garcia | Blog
A well-known Linux kernel developer once said, a poor craftsman famously complains about his tools, but a good craftsman knows how to choose excellent tools. Here's a python-based tool that integrates git and patchwork, and can greatly improve your toolbox.
April 15, 2019 by Adrian Ratiu | Blog
The second part of this series takes a more in-depth look at the eBPF VM and program studied in the first part. Having this low level knowledge is not mandatory but can be a very useful foundation for the rest of the series.
April 05, 2019 by Adrian Ratiu | Blog
Interested in learning more about low-level specifics of the eBPF stack? Read on as we take a deep dive, from its VM mechanisms and tools, to running traces on remote, resource-constrained embedded devices.
April 01, 2019 by Robert Foss | Blog
It's now possible to run Android applications in the same graphical environment as regular Wayland Linux applications with full 3D acceleration. Here's a look at SPURV, our experimental containerized Android environment.
March 27, 2019 by Andrzej Pietrasiewicz | Blog
In the previous post I introduced you to the subject of USB gadgets implemented as machines running Linux. In this post, we look at how to implement your very own USB function with FunctionFS and how to integrate that with systemd.
March 20, 2019 by André Almeida | Blog
In this tutorial, we'll look at how to create a functional and simple Arch Linux virtual machine image, that can have network access, display graphical windows and share a folder with the host.
March 13, 2019 by Robert Foss | Blog
During the past few months significant progress has been made on the Open Source Arm Mali GPU driver front, culminating in the Panfrost driver targeting Mali T and G-series of GPUs being available now.
March 12, 2019 by Helen Koike | Blog
With just a few simple steps, you can compile and boot a Raspberry Pi using the Linux kernel mainline source code. Here's how.
March 05, 2019 by Lucas Kanashiro | Blog
Since the last Debian release, a number of changes have been made in the Debian Cloud Team, both on the technical & organisational level within the community. Here's a look at what's in store for Buster!
March 04, 2019 by Tomeu Vizoso | Blog
Following two months of work to develop a new kernel driver for Midgard and Bifrost GPUs, the kernel side of Panfrost is now in a form close to be acceptable in the mainline Linux kernel.
February 18, 2019 by Andrzej Pietrasiewicz | Blog
A look at how to implement USB gadget devices on Linux machines which have the necessary UDC hardware, automate the manual configfs process via declarative gadget "schemes", and use systemd for gadget composition at boot time.
February 15, 2019 by Mark Filion | Blog
From the latest on Open Source projects Zink (OpenGL on Vulkan) and VirGL (virtual 3D GPU for QEMU), to a state of the union on GStreamer embedded, and a look at how the KernelCI project is getting a second breath, Collaborans presented in five devrooms.
June 02, 2025 by Kara Bembridge | News & Events
Next week Collabora will be covering a lot of ground, attending 3 separate events in 3 different time zones: ISC High Performance, Augmented World Expo, and InfoComm! Catch up with us at one of these events.
May 29, 2025 by Vineet Suryan | News & Events
After cleaning up and expanding Whisper-Hindi to 3,000 hours, we now have explicit timestamp prediction, faster I/O, and fine-tuned models across all sizes, bringing us even closer to fully reliable, production-ready Hindi ASR.
May 27, 2025 by Detlev Casanova | News & Events
The latest Linux kernel brings expanded hardware support for MediaTek and Rockchip, enhanced graphics drivers, and more. Collabora played a key role in this release, with no less than 20 authored contributors!
May 26, 2025 by Erik Faye-Lund | News & Events
Just about 6 weeks after we announced Vulkan 1.1 conformance for PanVK on G610 GPUs, Vulkan 1.2 is now also checked off the list!
May 22, 2025 by Mark Filion | News & Events
Monado's first stable release of 2025 is here. From enhanced Android support and driver updates to improved runtime stability and tooling, Collabora's XR team delivered a wide array of improvements for the cross-platform, open source OpenXR runtime.
May 01, 2025 by Kara Bembridge | News & Events
Join us in Stuttgart, Germany for XR EXPO 2025! This two-day event will be the meeting place for the XR community to exchange ideas and explore the latest trends.
April 22, 2025 by Faith Ekstrand | News & Events
As of today, NVK is a conformant Vulkan 1.4 implementation for NVIDIA Maxwell, Pascal, and Volta GPUs, and will be enabled by default starting with Mesa 25.1.
April 17, 2025 by Eleni Katsoula | News & Events
Our commitment to open source extends beyond contributing code. We are dedicated to upholding the highest standards of license compliance throughout our development processes.
April 15, 2025 by Mark Filion | News & Events
This May, Embedded Recipes 2025, co-sponsored by Collabora, heads to Nice, France with talks, workshops, and a PipeWire hackfest, all bookended by the Linux Media Summit and the GStreamer Spring Hackfest!
April 14, 2025 by Erik Faye-Lund | News & Events
PanVK has reached a new milestone, and is now officially conformant with the Vulkan 1.1 specification on the Arm Mali-G610 GPU! The submission was done from the Mesa 25.0.2 release, and covers both armhf as well as aarch64 architectures.
April 10, 2025 by Daniel Stone | News & Events
Three demos. One stand. From end-to-end HDR and a brand-new SoC running PanVK, to NVK and WebGPU out of the box — discover how Collabora pushed open source graphics forward at Embedded World 2025.
April 09, 2025 by Olivier Crête | News & Events
Collabora once again played a key role in the latest release of GStreamer, contributing enhancements such as improved hardware efficiency, support for the MPEG-5 LCEVC codec, and better integration for analytics and machine learning.
Here are the events we'll be attending in the coming weeks – come say hello!
June 10-13, Hamburg, Germany
June 10-12, Long Beach, USA
June 11-13, Orlando, USA
June 30-July 4, Nantes, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português