October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 12, 2018 by Mark Filion | News & Events
We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 21, 2018 by Emil Velikov | Blog
A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.
June 12, 2020 by Stéphane Cerveau | Blog
Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.
June 05, 2020 by Alyssa Rosenzweig | Blog
With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.
May 27, 2020 by Adrian Ratiu | Blog
Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.
May 15, 2020 by Stéphane Cerveau | Blog
gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.
May 12, 2020 by Andre Almeida | Blog
In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.
May 07, 2020 by George Kiagiadakis | Blog
An in-depth look at WirePlumber, the modular and extensible session manager for PipeWire that brings advanced device management, policy control and security enforcement capabilities.
April 28, 2020 by Guillaume Desmottes | Blog
With Rust gaining traction among the GStreamer community as an alternative to C to write applications and plugins, we began wondering, could the size of such Rust plugins be a problem for embedded systems?
April 23, 2020 by Alyssa Rosenzweig | Blog
The Panfrost project building a free, Open Source graphics driver for modern Mali GPUs has reached a new milestone: the first 3D render, including basic texture support, on a Bifrost chip (Mali G31)!
April 20, 2020 by Mark Filion | Blog
Google Open Source has announced their 2020 first quarter Google Open Source Peer Bonus winners, and Alyssa Rosenzweig, Software Engineer at Collabora, is among the recipients!
April 17, 2020 by Andre Almeida | Blog
In my previous blog post, we discussed the importance of testing, what is fuzzing, and how the syzkaller fuzzes the kernel in order to find bugs. Now, let’s install the tool and starting using it to improve our code base.
April 14, 2020 by Mark Filion | Blog
Open Source software development thrives on remote collaboration, and continues to do so in 2020, with multiple projects announcing releases in the first quarter.
April 10, 2020 by Pekka Paalanen | Blog
When you work on a piece of software, you usually want to be able to build and test it manually on your local system, but without compromising your system or destabilizing the distribution provided software.
October 13, 2015 by Guy Lunardi | News and Events
Seoul, South Korea - From 20/10/2015 to 23/10/2015: We will be exhibiting at the GENIVI Showcase during the All Member Meeting.
September 28, 2015 by Guy Lunardi | News and Events
Dublin, Ireland - from 08/10/2015 to 09/10/2015: The GStreamer Conference is a conference for anyone interested in the GStreamer multimedia framework or Open Source and cross-platform multimedia.
September 05, 2015 by Guy Lunardi | News and Events
Amsterdam, The Netherlands - from 10/09/2015 to 15/09/2015: we are thrilled to be joining ARM to demonstrate our latest technology showcases together at their booth at IBC 2015. Booth Hall 4.C61
August 14, 2015 by Guy Lunardi | News and Events
Seattle, USA - from 19/08/2015 to 21/08/2015: The Linux Plumbers Conference (LPC) is a developer conference for those working on the “plumbing” of Linux.
August 14, 2015 by Guy Lunardi | News and Events
Heidelberg, Germany - from 15/08/2015 to 22/08/2015: The 16th annual Debian developers meeting.
August 14, 2015 by Guy Lunardi | News and Events
Montpellier, France - from 14/08/2015 to 16/08/2015: GStreamer developers are meeting up to work on the project.
March 20, 2015 by Guy Lunardi | News and Events
Orlando, USA - from 17/06/2015 to 19/06/2015: we'll be exhibiting at InfoComm 2015, the largest event for professional AV in the world. Collabora booth 5469
March 18, 2015 by Guy Lunardi | News and Events
Stuttgart, Germany - From 22/04/2015 to 22/04/2015: We will be exhibiting at the GENIVI Demonstration Showcase during the All Member Meeting.
January 15, 2015 by Guy Lunardi | News and Events
Amsterdam, The Netherlands February 10-12, 2015: the world’s largest tradeshow dedicated to professional AV and electronic systems integration. Collabora booth #11-E61
December 17, 2014 by Guy Lunardi | News and Events
Las Vegas, USA - January 6th - 9th, 2015: Collabora will be participating with key partners at CES 2015, the world’s gathering place for all who thrive on the business of consumer technologies.
December 16, 2014 by Guy Lunardi | News and Events
Cambridge, UK January 25-29, 2015: Hosted at Collabora's UK headquarters, the Event Developer Hackfest 2015 aims to continue the tradition of pushing forward roadmaps for the toolkit and developer experience.
November 24, 2014 by Guy Lunardi | News and Events
A Coruña, Spain - December 7-10, 2014: Collabora are pleased to be sponsoring and attending the upcoming Web Engines Hackfest, which will bring together members from all parts of the Web Platform community.
Here are the events we'll be attending in the coming weeks – come say hello!
May 8-9, Stuttgart, Germany
May 12-14, Seoul, South Korea
May 13, Nice, France
May 14-16, Nice, France
May 16-18, Nice, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português