News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Matt Godbolt sold me on Rust (by showing me C++)

May 06, 2025 by Gustavo Noronha  |   Blog

Gustavo Noronha helps break down C++ and shows how that knowledge can open up new possibilities with Rust.

Matt Godbolt sold me on Rust (by showing me C++)

Debuting at XR EXPO 2025

May 01, 2025 by Kara Bembridge  |   News & Events

Join us in Stuttgart, Germany for XR EXPO 2025! This two-day event will be the meeting place for the XR community to exchange ideas and explore the latest trends.

Debuting at XR EXPO 2025

Customizing WirePlumber's configuration for embedded systems

April 29, 2025 by George Kiagiadakis  |   Blog

Configuring WirePlumber on embedded Linux systems can be somewhat confusing. We take a moment to demystify this process for a particular use case.

Customizing WirePlumber's configuration for embedded systems

Evolving hardware, evolving demo: Collabora's Embedded World Board Farm

April 24, 2025 by Martyn Welch  |   Blog

Collabora's Board Farm demo, showcasing our recent hardware enablement and continuous integration efforts, has undergone serious development over the years. Here's a look at notable changes and improvements made for Embedded World 2025.

Evolving hardware, evolving demo: Collabora's Embedded World Board Farm

NVK enabled for Maxwell, Pascal, and Volta GPUs

April 22, 2025 by Faith Ekstrand  |   News & Events

As of today, NVK is a conformant Vulkan 1.3 implementation for NVIDIA Maxwell, Pascal, and Volta GPUs, and will be enabled by default starting with Mesa 25.1.

NVK enabled for Maxwell, Pascal, and Volta GPUs

Raising the bar for Open Source standards through OpenChain

April 17, 2025 by Eleni Katsoula  |   News & Events

Our commitment to open source extends beyond contributing code. We are dedicated to upholding the highest standards of license compliance throughout our development processes.

Raising the bar for Open Source standards through OpenChain

Embedded week in Nice

April 15, 2025 by Mark Filion  |   News & Events

This May, Embedded Recipes 2025, co-sponsored by Collabora, heads to Nice, France with talks, workshops, and a PipeWire hackfest, all bookended by the Linux Media Summit and the GStreamer Spring Hackfest!

Embedded week in Nice

PanVK is officially Vulkan 1.1 conformant

April 14, 2025 by Erik Faye-Lund  |   News & Events

PanVK has reached a new milestone, and is now officially conformant with the Vulkan 1.1 specification on the Arm Mali-G610 GPU! The submission was done from the Mesa 25.0.2 release, and covers both armhf as well as aarch64 architectures.

PanVK is officially Vulkan 1.1 conformant

A tale of three demos: Breakthroughs in Open Source graphics at Embedded World 2025

April 10, 2025 by Daniel Stone  |   News & Events

Three demos. One stand. From end-to-end HDR and a brand-new SoC running PanVK, to NVK and WebGPU out of the box — discover how Collabora pushed open source graphics forward at Embedded World 2025.

A tale of three demos: Breakthroughs in Open Source graphics at Embedded World 2025

GStreamer 1.26: Improved hardware efficiency, the MPEG-5 LCEVC codec, and more

April 09, 2025 by Olivier Crête  |   News & Events

Collabora once again played a key role in the latest release of GStreamer, contributing enhancements such as improved hardware efficiency, support for the MPEG-5 LCEVC codec, and better integration for analytics and machine learning.

GStreamer 1.26: Improved hardware efficiency, the MPEG-5 LCEVC codec, and more

Kernel 6.14: Enhanced hardware capabilities, improved performance & more!

March 26, 2025 by Cristian Ciocaltea  |   News & Events

The kernel release emphasizes the continuing growth and maturity of the Linux ecosystem and delivers new features, improvements, and optimizations that everyone will be eager to explore. See where Collabora's kernel team contributed to this release.

Kernel 6.14: Enhanced hardware capabilities, improved performance & more!

Hololight joins the OpenXR momentum

March 26, 2025 by Kara Bembridge  |   News & Events

Collabora is thrilled to see its partner, Hololight, join the Khronos Group and become an active member of the OpenXR Working Group. We are excited to support their innovative approach and rapid expansion in the XR streaming space.

Hololight joins the OpenXR momentum

Understanding computer vision & AI, part 1

August 13, 2020 by Marcus Edel  |   Blog

Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.

Understanding computer vision & AI, part 1

Testing Weston DRM/KMS backends with virtme and VKMS

August 07, 2020 by Leandro Ribeiro  |   Blog

Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.

Testing Weston DRM/KMS backends with virtme and VKMS

An introduction to Linux kernel initcalls

July 14, 2020 by Mylène Josserand  |   Blog

Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.

An introduction to Linux kernel initcalls

Deep dive into OpenGL over DirectX layering

July 09, 2020 by Louis-Francis Ratté-Boulianne  |   Blog

Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.

Deep dive into OpenGL over DirectX layering

Using syzkaller, part 4: Driver fuzzing

June 26, 2020 by Ricardo Cañuelo Navarro  |   Blog

Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.

Using syzkaller, part 4: Driver fuzzing

Cross building Rust GStreamer plugins for the Raspberry Pi

June 23, 2020 by Guillaume Desmottes  |   Blog

Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.

Cross building Rust GStreamer plugins for the Raspberry Pi

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

June 12, 2020 by Stéphane Cerveau  |   Blog

Adaptive streaming is a technique to provide flexibility and scalability by offering variable bit-rate streams to the client. Here's a quick guide on how to generate a MPEG-DASH stream (the most completely adaptive streaming technique) using GStreamer.

Generating MPEG-DASH streams for Open Source adaptive streaming with GStreamer

Bifrost meets GNOME: Onward & upward to zero graphics blobs

June 05, 2020 by Alyssa Rosenzweig  |   Blog

With only free software, a Mali G31 chip can now run Wayland compositors with zero-copy graphics, including GNOME 3. We can run every scene in glmark2-es2, 3D games like Neverball can be played, and video players mpv and Kodi are now supported.

Bifrost meets GNOME: Onward & upward to zero graphics blobs

Using regmaps to make Linux drivers more generic

May 27, 2020 by Adrian Ratiu  |   Blog

Device drivers can support more revisions and SoC platforms by abstracting away specific hardware interface layouts. Let's examine a specific instance of this process, namely the effort to make the MIPI DSI host controller driver more generic.

Using regmaps to make Linux drivers more generic

Cross-compiling with gst-build and GStreamer

May 15, 2020 by Stéphane Cerveau  |   Blog

gst-build is one of the main build systems used by the community to develop the GStreamer platform. In my last blog post, I presented gst-build and explained how to get started with it. Now, let's get straight to the point regarding cross-compilation.

Cross-compiling with gst-build and GStreamer

Using syzkaller, part 3: Fuzzing your changes

May 12, 2020 by Andre Almeida  |   Blog

In part 2 of this series on syzkaller, we looked at how to install the tool and use it to improve our code base. Now, how does syzkaller report a bug it finds in the execution path of a system call? Let's add a new syscall description and see how it goes.

Using syzkaller, part 3: Fuzzing your changes

WirePlumber, the PipeWire session manager

May 07, 2020 by George Kiagiadakis  |   Blog

An in-depth look at WirePlumber, the modular and extensible session manager for PipeWire that brings advanced device management, policy control and security enforcement capabilities.

WirePlumber, the PipeWire session manager

WirePlumber in Fedora 35

November 02, 2021 by George Kiagiadakis  |   News & Events

Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.

WirePlumber in Fedora 35

Open Source Summit + Embedded Linux Conference 2021

September 24, 2021 by Mark Filion  |   News & Events

Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.

Open Source Summit + Embedded Linux Conference 2021

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

September 21, 2021 by Alyssa Rosenzweig  |   News & Events

This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

Generate a minimal GStreamer build, tailored to your needs

September 16, 2021 by Stéphane Cerveau  |   News & Events

GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.

Generate a minimal GStreamer build, tailored to your needs

Kernel 5.14: 30 years in the making and still improving

September 07, 2021 by Nícolas F. R. A. Prado  |   News & Events

With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.

Kernel 5.14: 30 years in the making and still improving

Linaro Virtual Connect - Fall 2021

September 01, 2021 by Mark Filion  |   News & Events

September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!

Linaro Virtual Connect - Fall 2021

Reverse-engineering the Mali G78

July 20, 2021 by Alyssa Rosenzweig  |   News & Events

After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.

Reverse-engineering the Mali G78

Kernel 5.13: Growing team and KernelCI hackfest

July 08, 2021 by Gabriel Krisman Bertazi  |   News & Events

Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.

Kernel 5.13: Growing team and KernelCI hackfest

A very successful first KernelCI hackfest

June 21, 2021 by Shreeya Patel  |   News & Events

Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.

A very successful first KernelCI hackfest

Growing for the road ahead

June 21, 2021 by Erica Ryoo  |   News & Events

Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!

Growing for the road ahead

Wine on Wayland meets Vulkan, multi-monitor support & more

June 07, 2021 by Alexandros Frantzis  |   News & Events

We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.

Wine on Wayland meets Vulkan, multi-monitor support & more

A libweston-based compositor for Automotive Grade Linux

June 02, 2021 by Marius Vlad  |   News & Events

Simplifying AGL's existing Wayland-based graphical stack and avoiding the use of modules that aren't maintained upstream has lead to the creation of a new compositor based on libweston, bringing more reliable and fine-grained system control.

A libweston-based compositor for Automotive Grade Linux

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

ICME

June 30-July 4, Nantes, France

 

AGL All Member Meeting

July 9-10, Berlin, Germany

 

DebConf

July 14-20, Brest, France

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2025. All rights reserved. Privacy Notice. Sitemap.