April 05, 2017 by Daniel Stone | Blog
Today we all read the announcement of Ubuntu's decision to refocus on cloud and IoT activities, dropping Unity 8 to move back to a GNOME-based desktop for the 17.04 LTS.
April 03, 2017 by Mark Filion | News and Events
Today, Olivier Crête, libnice maintainer and Collabora Multimedia Lead, announced the availability of libnice 0.1.14, the latest release of the NAT traversal library implementing the RFC for Interactive Connectivity Establishment (ICE).
March 29, 2017 by Robert Foss | Blog
Android uses the HWC API to communicate with graphics hardware. This API is not supported on the mainline Linux graphics stack, but by using drm_hwcomposer as a shim it now is.
March 28, 2017 by Gabriel Krisman Bertazi | Blog
Like starting a car with the hood open, sometimes you need to run your program with certain analysis tools attached to get a full sense of what is going wrong – or right.
March 24, 2017 by Simon McVittie | Blog
At the GTK hackfest in London (which accidentally became mostly a Flatpak hackfest) I've mainly been looking into how to make D-Bus work better for app container technologies like Flatpak and Snap.
March 22, 2017 by Mark Filion | News and Events
Check out the April issue (#222) of Linux Format magazine for our new monthly column on all things Open Source, including graphics, multimedia and more!
March 21, 2017 by Gabriel Krisman Bertazi | Blog
Modern CPUs implement a number of technologies that may affect application performance in unpredictable ways. Figuring out what is going wrong with an application can be a hard task, but it can become much easier with the correct analysis tools.
March 13, 2017 by Frédéric Dalleau | Blog
Once you've setup a virtual machine in QEMU using debootstrap, there are a number of tools available for testing, tracing and debugging, such as Kmemleak for memory leaks, GDB (GNU Debugger), ftrace et dynamic_debug.
March 08, 2017 by Robert Foss | Blog
Before being able to write firmware data to any production Chromebook device, the Write-Protect screw has to be removed.
March 07, 2017 by Mark Filion | News and Events
Over the next two weeks, Collaborans will be present at four different events across the globe. If you plan on attending at any of these conferences, please reach out and say hello!
March 01, 2017 by Daniel Stone | Blog
The past few months have been busy ones on the open-source graphics front, bringing with them Wayland 1.13, Weston 2.0 and Mesa 17.0. Here's a look at some of these developments, including Collabora's behind-the-scenes work on performance improvement.
February 23, 2017 by Robert Foss | Blog
How to create your custom Android image, and APK app(s), all at once.
September 21, 2020 by Marcus Edel | Blog
Introducing an accurate and light-weight deep network for video super-resolution upscaling, running on a completely open source software stack using Panfrost, the free and open-source graphics driver for Mali GPUs.
September 11, 2020 by Raghavendra Rao | Blog
PipeWire continues to evolve with the recent integration of libcamera, a library to support complex cameras. In this blog post, I'll explain why libcamera exists, what it does, and how we integrated it in PipeWire.
August 31, 2020 by Emil Velikov | Blog
A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).
August 27, 2020 by Gabriel Krisman Bertazi | Blog
Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.
August 21, 2020 by Antonio Caggiano | Blog
We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!
August 20, 2020 by Antonio Ospite | Blog
Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.
August 13, 2020 by Marcus Edel | Blog
Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.
August 07, 2020 by Leandro Ribeiro | Blog
Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
July 09, 2020 by Louis-Francis Ratté-Boulianne | Blog
Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.
June 26, 2020 by Ricardo Cañuelo Navarro | Blog
Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.
June 23, 2020 by Guillaume Desmottes | Blog
Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.
February 28, 2024 by Faith Ekstrand | News & Events
The merge request has landed, the non-conformant implementation warnings are gone, and NVK's Meson configuration now reads "nouveau" instead of "nouveau-experimental". It's now time to start shipping NVK to users!
February 26, 2024 by Kara Bembridge | News & Events
We've recently had some new faces join the team and we are delighted that our talented new joiners have readily jumped in to advance the open source mission.
February 15, 2024 by Mark Filion | News & Events
Collabora's engineers presented six talks over the course of the weekend, with topics including a review of recent improvements to GStreamer, a look at the state of video offloading on the Linux desktop, and more.
February 13, 2024 by Daniel Morin | News & Events
Engineers have widely adopted GStreamer to build video analytics pipelines, and while many companies have indeed built their machine learning analysis framework around GStreamer, no one had made the effort to contribute upstream, until now.
January 30, 2024 by Alexandros Frantzis | News & Events
2023 was a great year for the Wayland driver for Wine. After several merge requests, many people are now already able to use the latest Wine release to enjoy some of their favorite Windows applications in a completely X11-free environment!
January 25, 2024 by Marcus Edel | News & Events
By creating a real-time AI chatbot communication system using WhisperLive and WhisperSpeech, we have addressed the unnatural delay in current bot interactions for seamless conversation.
January 18, 2024 by Kara Bembridge | News & Events
With many dedicated souls willing to endure a FOSDEM queue, Collabora's engineers will be giving 6 talks spread out amongst multiple devrooms including Open Media and Testing & Continuous delivery.
January 11, 2024 by Eugen Hristev | News & Events
Collabora's kernel team made a number of key contributions including a new kselftest for verifying driver probe of Devicetree-based platforms, multiple improvements to further improve support for MediaTek SoCs found in Chromebooks, and more.
December 21, 2023 by Marius Vlad | News & Events
Weston 13.0 brings multiple fixes and important changes, notably the ability to load multiple backends simultaneously. This can be used to load VNC, RDP, or PipeWire backends for remote access alongside the native DRM backend.
December 20, 2023 by Faith Ekstrand | News & Events
As 2023 draws to a close, I wanted to give a quick update on NVK, what's happened this year, and where we'll be headed in 2024. While previous posts have focused primarily on the technical details, this post will be more geared towards users.
December 07, 2023 by Mark Filion | News & Events
Collabora is headed to California to take part in the inaugural edition of AI.dev: Open Source GenAI & ML Summit, a new event which aims to bring together the brightest developers from around the world to shape the trajectory of open source AI.
November 27, 2023 by George Kiagiadakis | News & Events
It is with the utmost excitement that we witness the release of PipeWire 1.0, the first officially stable release of this noteworthy inter-process multimedia streaming framework after many years of development.
Here are the events we'll be attending in the coming weeks – come say hello!
May 8-9, Stuttgart, Germany
May 12-14, Seoul, South Korea
May 13, Nice, France
May 14-16, Nice, France
May 16-18, Nice, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português