October 12, 2018 by Zeeshan Ali | Blog
After I started working for Collabora in April, I've finally been able to put some time on maintenance and development of Geoclue again. While I've fixed quite a few issues on the backlog, there has been some significant changes as of late.
October 12, 2018 by Mark Filion | News & Events
We're headed to Heraklion, Greece, to meet with the Panhellenic FOSS community at FOSSCOMM, a conference for programmers, students and anyone else interested in the open source movement!
October 10, 2018 by Martyn Welch | Blog
Like all software, Open Source software isn't without it's bugs and issues. However, thanks to the nature of Open Source, resolving or mitigating the issue you encountered can be quite the satisfying adventure when it comes to scratching the itch.
October 02, 2018 by Lucas Kanashiro | Blog
Last month, the first "MicroDebConf" took place at the Gama campus of the University of Brasilia. Here's a look at how this one day event came to be, and what was accomplished during that day.
September 20, 2018 by Mark Filion | News & Events
Next week, Collaborans will be heading to Paris, A Coruña & Berlin, to sponsor and speak at four different conferences: Embedded Recipes, Kernel Recipes, All Systems Go and XDC 2018. See you there?
September 18, 2018 by Ezequiel Garcia | Blog
When working on the Linux Kernel, testing via QEMU is pretty common. Here's a look at virtme, a QEMU wrapper that uses the host instead of a virtual disk, making working with QEMU extremely easy.
September 10, 2018 by Mark Filion | News & Events
From September 14 to 18, Collabora will be exhibiting at the IBC Show 2018, the "world's most influential media, entertainment and technology show"! If you are planning on attending, please make sure to stop by our booth, D-15 in Hall 14!
August 30, 2018 by Maxime Buquet | Blog
Earlier this month, Collabora sponsored & hosted the XMMP Sprint, the first developer event in the XMPP community in a long time. Here's a look at what was accomplished over the weekend, and what's next for this open standard.
August 29, 2018 by Guillaume Tucker | Blog
In addition to Collabora's work to add support in mainline Linux kernel for several Chromebooks, these platforms are now being continuously tested as part of kernelci.org. Here's how to set them up for kernel development & automated testing with LAVA.
August 28, 2018 by Mark Filion | News & Events
Starting tomorrow, Collaborans will be in beautiful British Columbia to take part, and speak, in this year's Open Source Summit North America! If you are planning on attending, come say hello or catch one of our presentations!
August 27, 2018 by Robert Foss | Blog
Working with a git based project that has a defacto upstream repository means that you perioducally want to fetch the canonical master branch. This can be simplified with a .gitconfig alias.
August 21, 2018 by Emil Velikov | Blog
A look at the work and motivation behind implementing the Khronos EGLDevice extensions in Mesa. These extensions allow users of open source graphics drivers to cleanly describe & select which device to use in heterogeneous systems.
September 21, 2020 by Marcus Edel | Blog
Introducing an accurate and light-weight deep network for video super-resolution upscaling, running on a completely open source software stack using Panfrost, the free and open-source graphics driver for Mali GPUs.
September 11, 2020 by Raghavendra Rao | Blog
PipeWire continues to evolve with the recent integration of libcamera, a library to support complex cameras. In this blog post, I'll explain why libcamera exists, what it does, and how we integrated it in PipeWire.
August 31, 2020 by Emil Velikov | Blog
A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).
August 27, 2020 by Gabriel Krisman Bertazi | Blog
Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.
August 21, 2020 by Antonio Caggiano | Blog
We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!
August 20, 2020 by Antonio Ospite | Blog
Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.
August 13, 2020 by Marcus Edel | Blog
Following our recent presentation at OSSummit, many showed interest in learning more about solving real-world problems with computer vision. Here is a new blog series, on computer vision, object detection, and building a system on the edge.
August 07, 2020 by Leandro Ribeiro | Blog
Recent work in Weston, the industry-standard Wayland compositor, has enabled DRM/KMS backends to be tested in the absence of real hardware, enabling more battle testing of corner-case and error conditions within automated testing frameworks.
July 14, 2020 by Mylène Josserand | Blog
Initcalls, which serve to call functions during boot, were implemented early on in the development of the Linux Kernel. Read on as we take a closer look, including their purpose, their usage, ways to debug them (using initcall_debug or FTrace), and more.
July 09, 2020 by Louis-Francis Ratté-Boulianne | Blog
Earlier this year, we announced a new project with Microsoft: the implementation of OpenCL & OpenGL to DirectX translation layers. Here's the latest on this work, including the steps taken to improve the performance of the OpenGL-On-D3D12 driver.
June 26, 2020 by Ricardo Cañuelo Navarro | Blog
Syzkaller is much needed tool for Linux kernel testing and debugging. With some work, it can also be enhanced to find bugs in specific drivers, such as V4L2. Here's how.
June 23, 2020 by Guillaume Desmottes | Blog
Previously, we discussed about how Rust can be a great language for embedded programming. In this article, we'll explain an easy setup to cross build Rust code depending on system libraries, a common requirement when working on embedded systems.
December 19, 2022 by Kara Bembridge | News & Events
Contributing to the Vulkan Working Group since 2015, Faith has continues to make a significant impact. Her expertise and diligence has helped to shape the group and we're proud to see his hard work see some well earned spotlight.
December 13, 2022 by AngeloGioacchino Del Regno | News & Events
Collabora's contributions include ongoing upstreaming of the RockChip RK3588 and MediaTek Helio X10 (MT6795) SoCs, numerous bug fixes and improvements for Cedrus and Hantro IPs, and memory shrinker support for the VirtIO-GPU driver.
December 12, 2022 by Alexandros Frantzis | News & Events
The focus in 2022 was on maturing the Wayland driver and keeping up to date with the Wine upstream internal changes, which involved updating it for the latest internal driver APIs, and making preparations to support WoW64.
December 06, 2022 by Adrian Ratiu | News & Events
After waiting in the Linux-next integration tree for about 18 months, the basic Rust infrastructure finally landed in the mainline Linux kernel with the imminent release of v6.1.
December 01, 2022 by Kara Bembridge | News & Events
Coming up next week at the Automotive Linux Summit in Yokohama and virtually, Marius Vlad and Daniel Stone will present the latest on the AGL Wayland compositor, and the current state of graphics virtualization upstream.
November 16, 2022 by Kara Bembridge | News & Events
Clear your schedules, this weekend's Capitole du Libre is calling your name for all things open source! Gathering in the "Pink City" of Toulouse, participants are welcome to attend with free admission from November 19 to 20 at the INP-ENSEEIHT.
November 10, 2022 by Kara Bembridge | News & Events
Making our grand debut, Collabora will be attending electronica in Munich for the first time! Diving into the world of electronics alongside the leading examples of the industry, we're excited to partake on all fronts.
October 14, 2022 by Shreeya Patel | News & Events
Collabora's contributions include mainlining the HEVC uAPI, adding VirtIO documentation, upstreaming MediaTek smartphones, and adding support for two new Chromebooks and for the Mali-G57 GPU in the Panfrost kernel driver.
October 06, 2022 by Benjamin Gaignard | News & Events
The release of Linux 6.0 earlier this week brought a significant milestone: the H.265/HEVC user-space API was mainlined, the result of more than two years of efforts by our engineering team.
October 04, 2022 by Faith Ekstrand | News & Events
Say hello to a brand new, open-source Vulkan driver for NVIDIA hardware in Mesa, written almost entirely from scratch using the new official headers from NVIDIA.
September 29, 2022 by Marius Vlad | News & Events
Announced earlier this week, Weston 11.0 brings a number of highlights including optimizations in the DRM-backend, color management infrastructure code and multiple RDP improvements.
September 29, 2022 by Kara Bembridge | News & Events
This year's X. Org Developer's Conference (XDC) is teaming up with WineConf and FOSS XR in Minneapolis at the University of St. Thomas' Opus Hall for a jam-packed three day event.
Here are the events we'll be attending in the coming weeks – come say hello!
May 8-9, Stuttgart, Germany
May 12-14, Seoul, South Korea
May 13, Nice, France
May 14-16, Nice, France
May 16-18, Nice, France
Whether writing a line of code or shaping a longer-term strategic software development plan, we'll help you navigate the ever-evolving world of Open Source.
한국어 버전의 Collabora.com 보기
Acesse Collabora.com em Português