News & Blog

News, Events & Blogs

News & Blog

The latest from our Open Source experts

Search the newsroom

Matt Godbolt sold me on Rust (by showing me C++)

May 06, 2025 by Gustavo Noronha  |   Blog

Gustavo Noronha helps break down C++ and shows how that knowledge can open up new possibilities with Rust.

Matt Godbolt sold me on Rust (by showing me C++)

Debuting at XR EXPO 2025

May 01, 2025 by Kara Bembridge  |   News & Events

Join us in Stuttgart, Germany for XR EXPO 2025! This two-day event will be the meeting place for the XR community to exchange ideas and explore the latest trends.

Debuting at XR EXPO 2025

Customizing WirePlumber's configuration for embedded systems

April 29, 2025 by George Kiagiadakis  |   Blog

Configuring WirePlumber on embedded Linux systems can be somewhat confusing. We take a moment to demystify this process for a particular use case.

Customizing WirePlumber's configuration for embedded systems

Evolving hardware, evolving demo: Collabora's Embedded World Board Farm

April 24, 2025 by Martyn Welch  |   Blog

Collabora's Board Farm demo, showcasing our recent hardware enablement and continuous integration efforts, has undergone serious development over the years. Here's a look at notable changes and improvements made for Embedded World 2025.

Evolving hardware, evolving demo: Collabora's Embedded World Board Farm

NVK enabled for Maxwell, Pascal, and Volta GPUs

April 22, 2025 by Faith Ekstrand  |   News & Events

As of today, NVK is a conformant Vulkan 1.3 implementation for NVIDIA Maxwell, Pascal, and Volta GPUs, and will be enabled by default starting with Mesa 25.1.

NVK enabled for Maxwell, Pascal, and Volta GPUs

Raising the bar for Open Source standards through OpenChain

April 17, 2025 by Eleni Katsoula  |   News & Events

Our commitment to open source extends beyond contributing code. We are dedicated to upholding the highest standards of license compliance throughout our development processes.

Raising the bar for Open Source standards through OpenChain

Embedded week in Nice

April 15, 2025 by Mark Filion  |   News & Events

This May, Embedded Recipes 2025, co-sponsored by Collabora, heads to Nice, France with talks, workshops, and a PipeWire hackfest, all bookended by the Linux Media Summit and the GStreamer Spring Hackfest!

Embedded week in Nice

PanVK is officially Vulkan 1.1 conformant

April 14, 2025 by Erik Faye-Lund  |   News & Events

PanVK has reached a new milestone, and is now officially conformant with the Vulkan 1.1 specification on the Arm Mali-G610 GPU! The submission was done from the Mesa 25.0.2 release, and covers both armhf as well as aarch64 architectures.

PanVK is officially Vulkan 1.1 conformant

A tale of three demos: Breakthroughs in Open Source graphics at Embedded World 2025

April 10, 2025 by Daniel Stone  |   News & Events

Three demos. One stand. From end-to-end HDR and a brand-new SoC running PanVK, to NVK and WebGPU out of the box — discover how Collabora pushed open source graphics forward at Embedded World 2025.

A tale of three demos: Breakthroughs in Open Source graphics at Embedded World 2025

GStreamer 1.26: Improved hardware efficiency, the MPEG-5 LCEVC codec, and more

April 09, 2025 by Olivier Crête  |   News & Events

Collabora once again played a key role in the latest release of GStreamer, contributing enhancements such as improved hardware efficiency, support for the MPEG-5 LCEVC codec, and better integration for analytics and machine learning.

GStreamer 1.26: Improved hardware efficiency, the MPEG-5 LCEVC codec, and more

Kernel 6.14: Enhanced hardware capabilities, improved performance & more!

March 26, 2025 by Cristian Ciocaltea  |   News & Events

The kernel release emphasizes the continuing growth and maturity of the Linux ecosystem and delivers new features, improvements, and optimizations that everyone will be eager to explore. See where Collabora's kernel team contributed to this release.

Kernel 6.14: Enhanced hardware capabilities, improved performance & more!

Hololight joins the OpenXR momentum

March 26, 2025 by Kara Bembridge  |   News & Events

Collabora is thrilled to see its partner, Hololight, join the Khronos Group and become an active member of the OpenXR Working Group. We are excited to support their innovative approach and rapid expansion in the XR streaming space.

Hololight joins the OpenXR momentum

Developing Wayland Color Management and High Dynamic Range

November 19, 2020 by Pekka Paalanen  |   Blog

Wayland is still lacking proper consideration for color management & support for high dynamic range (HDR) imagery. However, a group of developers has begun an effort to fix this situation. This is their story.

Developing Wayland Color Management and High Dynamic Range

A summer sprint: bringing near-native performance to Zink

November 06, 2020 by Mike Blumenkrantz  |   Blog

This week marks two years since the OpenGL implementation on Vulkan was initially announced. Since then, and especially over the past few months, much has progressed with many new features being added and performance now close to native (95%!).

A summer sprint: bringing near-native performance to Zink

From Panfrost to production, a tale of Open Source graphics

November 03, 2020 by Alyssa Rosenzweig  |   Blog

Since our previous update on Panfrost, the open source stack for Arm's Mali Midgard and Bifrost GPUs, we've focused on taking our driver from its reverse-engineered origins on Midgard to a mature stack.

From Panfrost to production, a tale of Open Source graphics

Engaging in an "Open First" remote internship at Collabora

October 20, 2020 by Gustavo Noronha  |   Blog

The concept of a remote internship may raise some doubts, or even red flags, for many students, as would remote jobs for professionals. As a result, we pay extra attention to how we onboard and support our interns.

Engaging in an "Open First" remote internship at Collabora

Building GStreamer text rendering and overlays on Windows with gst-build

September 28, 2020 by Aaron Boxer  |   Blog

GStreamer relies on various 2D font rendering and layout libraries such as Pango and Cairo to generate text for the Pango plugin, which contains elements such as textoverlay. Here's how to add the Pango plugin to a gst-build installation on Windows.

Building GStreamer text rendering and overlays on Windows with gst-build

Initcalls, part 2: Digging into implementation

September 25, 2020 by Mylène Josserand  |   Blog

In this second part of this blog post series on Linux kernel initcalls, we'll go deeper into implementation, with a look at the colorful __device_initcall() macro, the rootfs initcall, and how modules can be executed.

Initcalls, part 2: Digging into implementation

Open Source meets Super Resolution, part 1

September 21, 2020 by Marcus Edel  |   Blog

Introducing an accurate and light-weight deep network for video super-resolution upscaling, running on a completely open source software stack using Panfrost, the free and open-source graphics driver for Mali GPUs.

Open Source meets Super Resolution, part 1

Integrating libcamera into PipeWire

September 11, 2020 by Raghavendra Rao  |   Blog

PipeWire continues to evolve with the recent integration of libcamera, a library to support complex cameras. In this blog post, I'll explain why libcamera exists, what it does, and how we integrated it in PipeWire.

Integrating libcamera into PipeWire

Pushing pixels to your Chromebook

August 31, 2020 by Emil Velikov  |   Blog

A high-level introduction of the Linux graphics stack, how it is used within ChromeOS, and the work done to improve software rendering (while simultaneously improving GPU rendering by reducing the boilerplate needed in applications).

Pushing pixels to your Chromebook

Using the Linux kernel's Case-insensitive feature in Ext4

August 27, 2020 by Gabriel Krisman Bertazi  |   Blog

Last year, a (controversial) feature was added to the Linux kernel to support optimized case-insensitive file name lookups in the Ext4 filesystem. Here's a look at why this was merged, what improvements have been made since, and how to put it to work.

Using the Linux kernel's Case-insensitive feature in Ext4

Panfrost performance counters with Perfetto

August 21, 2020 by Antonio Caggiano  |   Blog

We have now integrated Mali GPU hardware counters supported by Panfrost with Perfetto's tracing SDK, unlocking all-in-one graphics-aware profiling on Panfrost systems!

Panfrost performance counters with Perfetto

High bitrate video streaming with GStreamer's RTP elements

August 20, 2020 by Antonio Ospite  |   Blog

Key performance improvements and fixes to GStreamer's RTP stack have landed in GStreamer 1.18, due in the coming months. The latest enhancements provide an important boost in throughput, opening the gate to high bitrate video streaming.

High bitrate video streaming with GStreamer's RTP elements

WirePlumber in Fedora 35

November 02, 2021 by George Kiagiadakis  |   News & Events

Today marks a very exciting day as Fedora 35 has now been released, and with it comes WirePlumber as the default session manager for PipeWire! Under development by Collabora since 2019, WirePlumber has now entered the linux desktop space.

WirePlumber in Fedora 35

Open Source Summit + Embedded Linux Conference 2021

September 24, 2021 by Mark Filion  |   News & Events

Collaborans will be actively participating in next week's activities with seven talks on topics including Rust build scripts, embedded deep learning on GStreamer, HEVC decoding on mainline Linux, PipeWire and WirePlumber, and more.

Open Source Summit + Embedded Linux Conference 2021

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

September 21, 2021 by Alyssa Rosenzweig  |   News & Events

This important milestone is a step forward for the open source driver, as it now certifies Panfrost for use in commercial products containing Mali G52 and paves the way for further conformance submissions on other Mali GPUs.

Panfrost achieves OpenGL ES 3.1 conformance on Mali-G52

Generate a minimal GStreamer build, tailored to your needs

September 16, 2021 by Stéphane Cerveau  |   News & Events

GStreamer can be tricky to ship in a constrained device. Thanks to a partnership with Huawei, you can now use gst-build to generate a minimal GStreamer build, tailored to a specific application, or set of applications. Here's how.

Generate a minimal GStreamer build, tailored to your needs

Kernel 5.14: 30 years in the making and still improving

September 07, 2021 by Nícolas F. R. A. Prado  |   News & Events

With an ever-increasing interest in more modern hardware support, and a more reliable kernel that is thoroughly tested, contributions by Collabora's developers continue to help make this a reality for the Linux kernel.

Kernel 5.14: 30 years in the making and still improving

Linaro Virtual Connect - Fall 2021

September 01, 2021 by Mark Filion  |   News & Events

September's busy conference schedule kicks off next week with the Fall edition of Linaro Virtual Connect. Join us as we look at how to master your PipeWire streams with WirePlumber, and de-mystify GFX virtualization with VirGL!

Linaro Virtual Connect - Fall 2021

Reverse-engineering the Mali G78

July 20, 2021 by Alyssa Rosenzweig  |   News & Events

After a month of reverse-engineering the Arm Mali G78, we’re excited to release documentation on the Valhall instruction set, available as a PDF, as well as a Valhall assembler and disassembler to be used as a reverse-engineering aid.

Reverse-engineering the Mali G78

Kernel 5.13: Growing team and KernelCI hackfest

July 08, 2021 by Gabriel Krisman Bertazi  |   News & Events

Collabora's team working directly on the Linux kernel is growing. Collaborans continue to expand on their efforts to close the gap between hardware support on vendor trees and mainline.

Kernel 5.13: Growing team and KernelCI hackfest

A very successful first KernelCI hackfest

June 21, 2021 by Shreeya Patel  |   News & Events

Earlier this month, Collabora took part in the very first KernelCI hackfest, initiated as a joint effort with the Google Chrome OS team. Here's a look at what led to our participation and what was accomplished.

A very successful first KernelCI hackfest

Growing for the road ahead

June 21, 2021 by Erica Ryoo  |   News & Events

Despite the many obstacles brought on by the pandemic, Collabora has continued to grow its teams for the road ahead. Join us in welcoming Kiril, Benjamin, Daniel, Shreeya, Ariel, Nicolas and James!

Growing for the road ahead

Wine on Wayland meets Vulkan, multi-monitor support & more

June 07, 2021 by Alexandros Frantzis  |   News & Events

We first announced our work on the driver last December, and posted an update earlier this year. We are now happy to announce a second update for this driver, adding several major features which increase its scope and utility.

Wine on Wayland meets Vulkan, multi-monitor support & more

A libweston-based compositor for Automotive Grade Linux

June 02, 2021 by Marius Vlad  |   News & Events

Simplifying AGL's existing Wayland-based graphical stack and avoiding the use of modules that aren't maintained upstream has lead to the creation of a new compositor based on libweston, bringing more reliable and fine-grained system control.

A libweston-based compositor for Automotive Grade Linux

Search the newsroom

Upcoming Events

Here are the events we'll be attending in the coming weeks – come say hello!

ICME

June 30-July 4, Nantes, France

 

AGL All Member Meeting

July 9-10, Berlin, Germany

 

DebConf

July 14-20, Brest, France

 

Featured Video

Open Since 2005 logo

Our website only uses a strictly necessary session cookie provided by our CMS system. To find out more please follow this link.

Collabora Limited © 2005-2025. All rights reserved. Privacy Notice. Sitemap.